1. Equipment Application
It is mainly designed for aging of aluminum alloy and tempering of small sized metal parts like castings, coils, plates, tubes, and non-ferrous parts. It is equipped with electrical control system, which is more flexible, more accurate and high robust with automatic alarm function. Mechanical movement of the furnace are interlocked; with help from circulating fan, temperature uniformity can reach ≤±5ºC.
2. Supply Scope
3. Main Technical Parameter
It is mainly designed for aging of aluminum alloy and tempering of small sized metal parts like castings, coils, plates, tubes, and non-ferrous parts. It is equipped with electrical control system, which is more flexible, more accurate and high robust with automatic alarm function. Mechanical movement of the furnace are interlocked; with help from circulating fan, temperature uniformity can reach ≤±5ºC.
2. Supply Scope
No. |
Item |
Qty |
1 |
Furnace Body |
1 set |
2 |
Hot Air Circulating Fan |
2sets |
3 |
Heating Elements |
1set |
4 |
Air Duct and Guide Flow hood |
1set |
5 |
Furnace Door and Lifting Unit |
1set |
6 |
Door Tightening Unit |
1set |
7 |
Door Device |
1set |
8 |
Trolley and Seal Device |
1set |
9 |
Electrical Control System |
1set |
3. Main Technical Parameter
NO |
Item |
Data |
|
1 |
Effective Size of Furnace Chamber |
2500×1800×1400mm(××) | |
2 |
Rated Voltage |
380V |
|
3 |
Frequency |
50Hz | |
4 |
Maximum Temp. |
250ºC | |
5 |
Rated Heating Power |
220KW | |
6 |
Heating Zone |
2 | |
7 |
Heating Up time with full loaded |
≤3h(400ºC) | |
8 |
Temp. Uniformity |
±5ºC | |
9 |
Temp. Control Accuracy |
±1ºC | |
10 |
Temp. Control Method |
PID | |
11 |
Controller for Heating Elements |
Silicon Controlled Rectifier |
|
12 |
Temp. Controller |
Japan |
|
13 |
Instruments Accuracy |
0.1 | |
14 |
Paperless Recorder |
Fuji |
|
15 |
Thermocouple |
K K-type |
|
16 |
Thermocouple Grade |
Grade one |
|
17 |
Material of Heating Elements |
Stainless Steel Pip |
|
18 |
Circulating Fan Power |
~11KW×2=22KW | |
19 |
Lifting Motor Power |
1.5Kw | |
20 |
Door lifting speed |
8m/min | |
21 |
Trolley Driven power |
1.5KW | |
22 |
Trolley Moving Speed |
6m/min | |
23 |
Lining Type |
Full Fiber Lining |
|
24 |
Compressed Air Pressure |
0.5~0.7MPa | |
25 |
Compressed air Consumption |
≤0.5m3/ | |
26 |
Fan Noise |
≤80Bb | |
27 |
Skin Temp. |
Ambient + ≤35ºC | |
28 |
Door surface Temp. |
≤45ºC | |
29 |
Total Installed capacity |
290KW | |
30 | |||
Φ630mm, 200KG, 500mm , 100kg 300-350kg,580mm 130kg Coil Type : Φ630mm,200kg, 500mm , 100kg, Φ710mm, 300~350 kg, 580mm, 130kg. Maximum load : 18 coils. |
|||